106油墨粘性仪

The Model 106 Electronic Inkometerfeatures advanced microprocessor control,it provides the highest accuracy andefficiency for research and development,quality control and process evaluation.

Simulating the dynamic conditionsthat occur in the printing process, theInkometer provides reliable data on inktack. It measures the integrated forcesinvolved in ink film splitting and theeffects of speed, film thickness, temperatureand solvent evaporation on these forces.

The test results are numerical values (ingram-meters) for the torque required to“work” the ink film at known rates, withpredetermined film thickness andtemperature. These torque readings areactually measurements of the tack of the ink.

The Electronic Inkometer simplifies inktesting with push-button operation and adigital display of temperature, tack,RPM and test time. It operates at fixedspeeds of 150, 400, 800, 1200 and2000 RPM and has variable speeds up to3000 RPM (4000 RPM optional). Tackreadings are displayed, printed andtransmitted at either 10, 30 or 60 seconds.A built-in printer automatically prints theresults of a 10-minute ink stability test.

The Inkometer consists of an uppercomposition covered roller, a vibratorcomposition covered roller and atemperature controlled roller. The Upperroller is available for testing conventionalinks and UV inks.

The temperature is controlled bycirculat ing water through it. The controlunit is free-standing and utilizes arefrigerated bath circulator withstainless steel reservoi

The Model 106 Electronic Inkometerfeatures advanced microprocessor control,it provides the highest accuracy andefficiency for research and development,quality control and process evaluation.

Simulating the dynamic conditionsthat occur in the printing process, theInkometer provides reliable data on inktack. It measures the integrated forcesinvolved in ink film splitting and theeffects of speed, film thickness, temperatureand solvent evaporation on these forces.

The test results are numerical values (ingram-meters) for the torque required to“work” the ink film at known rates, withpredetermined film thickness andtemperature. These torque readings areactually measurements of the tack of the ink.

The Electronic Inkometer simplifies inktesting with push-button operation and adigital display of temperature, tack,RPM and test time. It operates at fixedspeeds of 150, 400, 800, 1200 and2000 RPM and has variable speeds up to3000 RPM (4000 RPM optional). Tackreadings are displayed, printed andtransmitted at either 10, 30 or 60 seconds.A built-in printer automatically prints theresults of a 10-minute ink stability test.

The Inkometer consists of an uppercomposition covered roller, a vibratorcomposition covered roller and atemperature controlled roller. The Upperroller is available for testing conventionalinks and UV inks.

The temperature is controlled bycirculat ing water through it. The controlunit is free-standing and utilizes arefrigerated bath circulator withstainless steel reservoir

Specifications

Options                       Optional OutputParallel BCD and RS-232 output are available as replacement options for multiplexed BCD.
RecordersA single-pen chart recorder and an X-Y recorder are available.

Roller Testing Speeds – Fixed  (314, 628, 942 and 1570 feet per minute)
400, 800, 1200 and 2000 RPM

Roller Testing Speeds – Variable  0 to 3000 RPM

Roller Distribution Speed         Nominal 150 RPM

Roller Set                        Total surface area of 106 square in. (2692.4 mm)

Power Consumption              Operating at 1200 RPM: 3.4 Amp
Operating at 300 RPM: 4.0 Amp
Operating at 800 RPM: 2.8 Amp
Standby: 0.22 Amp
Temperature Controller -- 5.5 Amp at steady state

Power Consumption             Operating at 1200 RPM: 3.4 Amp
Operating at 300 RPM: 4.0 Amp
Power Consumption              Operating at 1200 RPM: 3.4 Amp
Operating at 300 RPM: 4.0 Amp
Operating at 800 RPM: 2.8 Amp
Standby: 0.22 Amp
Temperature Controller -- 5.5 Amp at steady state

Power Requirements            Optional: 220 V± 10%, 50 Hz
Standard: 115 V ±10%, 60 Hz

Circuit Breaker Ratings         Main: 15 Amp Secondary: 0.5 Amp

Water Temperature Settings     90° F or variable

Heat Adjust Control             100 to 1000 watts

Reservoir Capacity             2.5 gallons