MMTD多模式反恐探测器
添加时间:2010-4-30 编辑:C055 阅读:次
- 产品名称:MMTD多模式反恐探测器
- 产品定货号:MB-04163-00
Feature Highlights
Hand-held, hardened detector for extreme conditions
Explosives, narcotics and CWA/TIC detection and identification in one instrument
Simultaneous dual mode detection of explosives and narcotics from a single sample
Increased range of explosive detection, including optimization for peroxides and taggants
Additional Highlights
Intuitive, easy to use interface using a Windows® CE based platform
Remote, unattended operation capability
Unlimited data storage via SD memory card
Up to 5 hours of uninterrupted operation with hot-swappable battery
Integrated USB
Wi-Fi Ethernet
The Multi-Mode Threat Detector (MMTD) is a rugged, portable hand-held system for the rapid detection and identification of explosives, narcotics or CWA/TICs featuring an optimized detection capability for peroxides, taggants and methamphetamine precursors. Additionally, a dual mode setting allows for the simultaneous detection of explosives and narcotics from one sample. With a quick switch, operators can select either particle or vapor analysis methods to utilize the best method for detecting the suspected threat.
Designed to IP54 rating for operation in extreme environmental conditions, the MMTD takes portable threat detection to a new level without compromising portability or functionality.
Other features include up to 5 hours of uninterrupted operation with the two hot-swappable batteries (included), remote, unattended operation for one or more units with alarm and status information reported to Command & Control via Wi-Fi Ethernet, unlimited data storage via SD card and exporting results via USB port. With the included software, advanced operators can perform more in-depth data analyses and print results, all via network connection.
The MMTD is powered by Smiths Detection proven and trusted IMS technology, used by the military, law enforcement and government agencies.
Specifications |
Technology |
Ion Mobility Spectrometry (IMS) |
Radiation Source |
63Ni, sealed 15 mCi |
Sample Collection |
Trace Particle and Vapor |
Operating Modes |
Simultaneous Explosives/Narcotics, Explosives only, Narcotics only, Chemical Warfare Agents/Toxic Industrial Chemicals |
Explosives Detected |
RDX, PETN, TNT, TATP, NG, H202, EGDN and others |
Narcotics Detected |
Cocaine, Heroin, Methamphetamine (including precursors), THC and others |
CWAs |
Nerve and blister agents such as Tabun, Sarin, Soman, Cyclosarin, Agent VX and Vx |
TICs |
Hydrogen Cyanide (HCN), Phosgene, S02, NH3 and others |
Sensitivity |
Particle: low nanogram (ng) range. Vapor: low parts per million (ppm) range |
False Alarm Rate |
Less than 1% |
Programmable Channels |
Over 40 |
Input Voltage |
12VDC, 90-264VAC, 47-63Hz; Auto sensing/switching; 2.5 hour battery |
Power Requirements |
Max 120W |
Warm up Time |
Less than 10 minutes |
Analysis Time |
Less than 10 seconds |
Alarm Type |
Audio and visual, with substance identification |
Display |
3.5” Color TFT LCD |
Data Storage |
Unlimited, based on capacity of removable SD Card |
Dimensions |
48,3 x 21,6 x 20,3 cm (19” x 8.5 ”x 8”) |
Weight |
5 kg (11 lbs.), including 2.5 hour hot swap battery |
Operating Temperature Range |
-7ºC to + 54ºC (20ºF to 130ºF), less than 95% relative humidity, non‑condensing |
Hardened Specifications |
1 meter (3’) drop to concrete, ability to operate in sand, rain, wind conditions. (IP54 operating, IP53 vapor sampling) |