泰亚赛福 —— 世界领先的检测仪器集成供应商
努力为您创造价值
智能 编号 品牌
通用环境检测仪器
产品导航
 您当前的位置:环境安全 >> 通用环境检测仪器 >> 温湿度仪 >> TREX-8遥控探针温度记录仪

TREX-8遥控探针温度记录仪

添加时间:2010-1-20 编辑:C055 阅读:

  • 产品名称:TREX-8遥控探针温度记录仪
  • 产品定货号:MB-03140-00
  • 产地:新西兰
  • 推荐:
The LogTag Remote Probe Temperature Recorder measures and stores up to 8000 temperature readings over -40°C to +99°C (-40°F to +210°F) measurement range. 
 
Using the LogTag Interface and LogTag’s freely available companion software LogTag Analyser , the LogTag is easily set-up for recording conditions including delayed start, sampling interval, number of readings, continuous or fixed number of readings and configuration of conditions to activate the ALERT indicator.
 
Readings are downloaded using LogTag Analyser which provides facilities for charting, zooming, listing data statistics and allows exporting the data to other applications such as Excel.
 
Highlights

 Alert indicator – indicates if readings are outside of preset limits
 OK indicator indicates if still recording and if readings within configured limits
 Inspection mark in log by push button
 Push Button Logging start with optional delayed start or specific Time & Date start
 Rapid Download! Takes only seconds to download recordings
‘Pre-Start’ logging - Logtag can be configured to record even if it has not been started.
 High performance at low cost
 Credit card sized case – thin enough to be easily mailed “letter rate”.
Real time clock records time & temperature simultaneously
 Easy to use LogTag Analyser software that runs on any PC configures LogTag for recording then downloads resulting data for analysis. Data can also be exported to fomats compatible with other applications such as Excel
 Re-calibration to achieve higher accuracy possible
 High quality gold plated remote sensor connector
 Interchangeable Remote Probes – LogTag remote temperature probes are interchangeable provided they are changed with LogTag ST100 type remote temperature sensors.

 
Specifications
Model#
 
TREX-8
Remote SensorMeasurement Range
 
-40°C ~ +99°C (-40°F ~ +210°F)
Recorder operating temperature range
 
-40°C ~ +85°C (-40°F ~ +185°F)
Resolution
 
< 0.1°C for -40°C ~ +40°C,
< 0.2°C for +40°C ~+80°C
Accuracy
 
With recorder case sitting in environmental temperature between 0°C ~ 50°C the rated accuracy is  :-±0.5°C for -10°C~ +40°C
better than ±0.7°C for -10°C~ -30°C & +40°C~+60°C
better than ±0.8°C for -30°C~ -40°C & +60°C~+80°C
better than ±1.0°C  for +80°C~+99°C
Capacity
 
8032 readings (16K bytes memory)
Sampling frequency
 
adjustable, 30 sec to several hours
Logging start options
 
Push button start or specific date & time.
Recording indication
 
Flashing 'OK' indicator flashing 'Alert' indicator.
Download Time
 
Typically with full memory (8000 readings) in less than 5 secs depending on computer or readout device used.
Environmental
 
IP61
Power source
 
3V Lithium battery
Battery life
 
2 ~ 3 years of normal use (based on 15 minute logging, download data monthly.
Size
 
86mm(H)x54.5mm(W)x8.6mm(T)
Weight
 
35g
Case Material
 
Polycarbonate
Standard remote sensor cable lengths
 
Standard: 1.5m (4’11”)
Extended: 3 m (9’10”) (recommended maximum)
Remote Sensor Cable Type
 
PTFE (FDA food contact rated) coaxial
Other features
 
• Logging start by push button or specific date/time start
• Optional clearing of alert indication by push button (places inspection make at same time).
• Download inspection mark recorded in LogTag memory every time LogTag is downloaded.
• 'Prestart' fail-safe logging (records temperature data even if not started)
• Low Battery indication in software.
• Comprehensive Alert indicator configuration.
• Calibration to achieve higher accuracy possible.

Note:

1. Resolution & Accuracy are rated values - actual product performance may be substantially better than figures stated.
2. LogTag ST100 remote proves are designed and calibrated for interchangeability with TREX loggers to the standard rated accuracy of the product. If a TREX/ST100 probe combination is calibrated to a higher level of accuracy (as is possible) then care should be taken to always use the same TREX/ST100 combination for measurements as the ST100 sensor is not rated interchangeable at accuracies better than the TREX/ST100  rating in this specification.

产品名称产品简介产品编号
TREX-8遥控探针温度记录仪The LogTag Remote Probe Temperature Recorder measures and stores up to 8000 temperature readings over -40°C to +99°C (-40°F to +210°F) measurement range.MB-03140-00



相关产品