SP2006-H/DIL/2x/F气体采样器

Based on probe SP2000-H/...

Electrically heated up to 180  or 280

NEMA 4, FRP housing

External heated critical orifice with additional safety filter

Including a dilution gas pre-heater

No dew point problems

Dilution ratios from 10:1 up to 500:1

With check gas connection

Independent of the process temperature

Changing of dilution and bypass block without any tools within a few minutes

No disconnection of any tubes or hoses for changing of dilution or bypass block

Easy operation and maintenance

 

Application:

The electrically heated M&C dilution probe is applicable for such processes, where the measuring procedure or the handling of the process gas require the dilution of the sample respectively the component to be measured. Typical applications are the use with toxic gases, the moisture measurement and the emission measurement in flue gases. The M&C dilution probe SP2006H/DIL... is based on the well tested M&C gas sample probe SP2000H. This enables the user to adapt the probe to nearly every application, using for example special filter techniques or special materials. The additional bypass injector minimizes the response time.