SP2000-H/DIL-VA-B气体采样器

Based on probe SP2000H/....

Electrically heated up to 180

External critical orifice is heated

Including a dilution gas pre- heater

No dew point problems

Dilution rates from 10:1 up to 500:1

With check gas connection

Independent of the process temperature

Easy operation and maintenance

With integrated ball valve at the probe inlet and bypass injector to minimize the response time

Application:

The electrically heated M&C dilution probe is applicable for such processes, where the measuring procedure or the handling of the process gas require the dilution of the sample respectively the component to be measured. Typical applications are the use with toxic gases, the moisture measurement and the emission measurement in flue gases. The M&C dilution probe SP2000H/DIL... is based on the well tested M&C gas sample probe SP2000H. This enables the user to adapt the probe to nearly every application, using for example special filter techniques or special materials.With the integrated ball valve it is possible to shut off the probe from the process for example to change the filter element in case of toxic sample gas and the additional bypass injector minimizes the response time.