S5 UPS充溢电池监测和确认系统

添加时间：2010-9-17 编辑：C055 阅读：次

加入购物车

加入对比

产品名称：S5 UPS充溢电池监测和确认系统
产品定货号：ME-06245-00

产地：美国
推荐：

S5 Series Battery Monitoring and Validation System has been designed specifically for your UPS flooded cell battery system.

Our patented and proven impedance measurement technology has the sensitivity required to find failing cells well before they pose a risk to your critical systems.

Plus, with battery sensing harnesses pre-designed and tested for your battery system, installation time is cut in half while increasing system reliability.

Key System Features

BTECH Monitors Key Battery Parameters in Real Time: System Voltage, Float, Charge and Discharge Current, plus ambient and pilot cell temperatures

Programmed Cell Impedance Measurement: Up to 24x / Day

Programmable Test & Out-of-Limits Alarms

Battery Discharge Data Logging

Up to 480 Individual Cells and 4 Strings per system

Individual String Current Monitoring for multi-string systems

Complete Isolation from the Battery String

No PC Required

Facility Management System Integration

MODBUS over TCP/IP for simple third-party software integration

(6) User-configurable Dry Contact Alarms

Alarm and Data Acquisition Options

Local: RS-232 and USB

Remote: 56k Modem and Integral Ethernet

Alarms: Text Message to multiple cell phones, pagers or e-mail
addresses, through BVM Software or FMS integration

Safety

BTECH Quick-Disconnect Safety Fuses simplify battery replacements while protecting personnel during installation and maintenance

System Specifications

Measurement Capability:
- Total Voltage: 0-600V
- Total Number Strings: 4
- Unit Voltage: 1-16 VDC
Unit Impedance 100µW to 20mW
Temperature - Unit and Ambient: -32°F to 160°F
Discharge Events:
- Date & Time
- System Voltage
- Load Current
- Power Removed
Discharge Logging: Programmable
Connection Capacity:
- Total Connection Points: 480
- Total Number of Parallel Strings: 4
Measurement Accuracy & Repeatability:
- System Voltage: +/ -0.1% Full Scale
- Unit Voltage: +/ -0.1% of Reading
- Unit Impedance: +/ -0.01 mW
- Temperature: +/ -1.0°F

Power Requirements:
-110-250 VAC (UPS Protected Power)
Enclosure:
- Controller: Metal, Rack or Wall Mount
- 24 Unit DCM: Flame Retardant Poly
LED Indicators - VM24 DCM:
- Green = Power On
LED Indicators - SCM600 Controller:
- Green = Summary No Alarms
- Yellow = Summary Maintenance Alarms
- Red = Summary Critical Alarms
- Red Equipment = Module not Communicating
- Alternating Green = Performing Measurement
Software:
- BVM 4.1 Windows® based software package designed for Windows® XP and higher
CE Mark

产品名称	产品简介	产品编号
S5 UPS充溢电池监测和确认系统	S5 Series Battery Monitoring and Validation System has been designed specifically for your UPS flooded cell battery system.	ME-06245-00