S5 UPS电池箱监测和确认系统

添加时间：2010-9-17 编辑：C055 阅读：次

加入购物车

加入对比

产品名称：S5 UPS电池箱监测和确认系统
产品定货号：ME-06244-00

产地：美国
推荐：

S5 Series Battery Monitoring and Validation System has been designed specifically for your UPS battery cabinet.

Our patented and proven impedance measurement technology finds bad batteries well before they pose a risk to your critical systems.

Plus, with battery sensing harnesses pre-designed and tested for your battery system, installation time is cut in half while increasing system reliability.

Key System Features

BTECH Monitors Key Battery Parameters in Real Time: System Voltage, Float, Charge and Discharge Current, plus ambient and pilot cell temperatures

Programmed Cell Impedance Measurement: Up to 24x / Day

Programmable Test & Out-of-Limits Alarms

Battery Discharge Data Logging

Up to 480 Individual Cells and 4 Strings per system

Individual String Current Monitoring for multi-string systems

Complete Isolation from the Battery String

No PC Required

Facility Management System Integration

MODBUS over TCP/IP for simple third-party software integration

(6) User-configurable Dry Contact Alarms

Alarm and Data Acquisition Options

Local: RS-232 and USB

Remote: 56k Modem and Integral Ethernet

Alarms: Text Message to multiple cell phones, pagers or e-mail addresses, through BVM Software or FMS integration

Safety

BTECH Quick-Disconnect Safety Fuses simplify battery replacements while protecting personnel during installation and maintenance

System Specifications

Measurement Capability:
- Total Voltage: 0-600V
- Total Number Strings: 4
- Unit Voltage: 1-16 VDC
Unit Impedance 100µW to 20mW
Temperature - Unit and Ambient: -32°F to 160°F
Discharge Events:
- Date & Time
- System Voltage
- Load Current
- Power Removed
Discharge Logging: Programmable
Connection Capacity:
- Total Connection Points: 480
- Total Number of Parallel Strings: 4
Measurement Accuracy & Repeatability:
- System Voltage: +/ -0.1% Full Scale
- Unit Voltage: +/ -0.1% of Reading
- Unit Impedance: +/ -0.01 mW
- Temperature: +/ -1.0°F

Power Requirements:
-110-250 VAC (UPS Protected Power)
Enclosure:
- Controller: Metal, Rack or Wall Mount
- 24 Unit DCM: Flame Retardant Poly
LED Indicators - VM24 DCM:
- Green = Power On
LED Indicators - SCM600 Controller:
- Green = Summary No Alarms
- Yellow = Summary Maintenance Alarms
- Red = Summary Critical Alarms
- Red Equipment = Module not Communicating
- Alternating Green = Performing Measurement
Software:
- BVM 4.1 Windows® based software package designed for Windows® XP and higher
CE Mark

产品名称	产品简介	产品编号
S5 UPS电池箱监测和确认系统	S5 Series Battery Monitoring and Validation System has been designed specifically for your UPS battery cabinet.	ME-06244-00