OS5100RB模拟示波器

添加时间：2010-4-23 编辑：X059 阅读：次

加入购物车

加入对比

产品名称：OS5100RB模拟示波器
产品定货号：ME-05864-00

产地：韩国
推荐：

OS-5100RB模拟示波器

特性介绍

100MHz Bandwidth,4CH

HF/LF抑制触发过滤器

自动设置功能

具有频率记数功能

4个通道，8条轨迹（OS-5100RA）

2个通道，4条轨迹（OS-5100RB）

游标读数功能

扫描速度为5ns/每格

通道1输出}

最大输出电压为400V

延时扫描功能

锁定功能

双时基功能

规格

		OS-5100RA	OS-5100RB
阴极管	配置和有效视频	6 inch rectangular screen with internal graticule: 8x10DIV (1div=1cm), marking for measurement of rise time. 2mm subdivisions along the central axis
	加速电势	+11.5kV approx (Ref. cathode)
	荧光器	P31 (Standard)
	聚焦	Possible (with auto - focus correction circuit)
	旋转线迹	provided
	比例照明	Variable
	亮度控制	provided
高强度Z轴输入	输入信号	Positive going signal decreases intensity + 5Vp-p or more signal cases noticeable modulation at normal intensity settings
	频宽	DC to 2MHz (-3dB)
	触发耦合	DC
	输入阻抗	20kOhm - 30kOhm typical
	最大输入电压	30V (DC + peak AC)
垂直偏移	频宽	DC Coupled (DC耦合): DC to 100MHz (2mV/DIV: DC to 50MHz) AC Coupled (AC 耦合): 10Hz to 100MHz (2mV/DIV: 10Hz to 50MHz)
	模式	CH1,CH2,DUAL,ADD,ALT CHOP,CH2 INV, QUAD	CH1,CH2,DUAL,ADD,ALT CHOP,CH2 INV for OS-5100RB
	偏转系数	2mV/div to 5V/div in 11 calibrated steps of a 1-2-5 sequence. (For OS-5100RA: CH3,CH4: 0.1V/DIV,0.5V/DIV) Continuously variable between steps at least 1:2:5
	准确度	+/-3%
	输入阻抗	Approx, 1Mohm in parelle1 with 25pF
	最大输入电压	Direct 400V (DC + AC Peak) (with probe: refer to probe specification)
	输入耦合	DC- GND - AC
	延升时间	3.5ns or less (2mV/DIV : 7ns or less)
	通道1输出	50mV/div into 50ohm : DC to 20MHz (-3dB)
	极性逆向	CH2 only
	信号延时	Delay cable supplied
水平偏移	显示方式	A, ALT ,B, B TRIG'D ,X-Y
	A 时基	0.5us/div to 0.5s/div in 22 calibrated steps 1-2-5 sequence, uncalibrated continuous control between steps at least 1:2:5
	锁定时间	Variable with the holdoff control
	B 时基	0.05us/div to 50us/div in 19 calibrated steps 1-2-5 sequence
	延时扫描定位调节	1 div or less to 10 div or more
	延迟拌动	better than 1:10000
	扫描放大	10 times (maximum sweep rate : 5ns/div)
	准确度	+/-3%,+/-5% (0℃ to 40℃) additional error for magnifier +/-2%
触发系统	触发模式	AUTO, NORM ,TV, SINGLE
	触发源	LINE, VERT, CH1,CH2,CH3,CH4	LINE, VERT, CH1,CH2
	耦合	AC, DC, HF, REJ, LF REJ, LF REJ, TV-V, TV-H
	倾斜率	+ or -
	TV-V, TV-H	At least 1 div or 1.0Vp-p
	外部触发输入阻抗	1MOhm (in parall1 with approx. 25pF)
	灵敏度和频率自动或标准	DC-10MHz 10MHz-100MHz INT 0.5div 1.5div EXT 0.1Vp-p 0.3Vp-p VERT 0.5div 3.0div
	最大输入电压	400V (DC + Peak AC)
X-Y 轴操作	X-axis (X轴)	(Same CH1 except for the following) Deflection factor; same as that of CH1/Accuracy : +/-6%/Frequency response: DC to 2MHz (-3dB)
	Y-axis (Y轴)	Same as CH2
	X-Y轴相位相差	3º or less (at DC to 100kHz)
直读功能	游标计数功能	△V, △T, △1/T
	自动设置	Enable
	频率计显示	Enable (only on Autosetup)
	面板设置显示	AC/DC/GND, V-MODE, CH2 Invert, Volts/div, *10 mAG, H-DSP MODE, TIME/DIV, trg source
	解析度	1/25 div
校准器	可调探针	approx. 1KHz frequency, 0.5Vp-p (+/-2%) square wave, duty ratio:～50%
电源供应	输入电压范围	90-250VAC (fuse : 1A 250V)
	电压频率	48-440Hz
	功率	Max.50W
物理参数	尺寸	328(W)×153(H)×392(L)mm
	重量	8kg
环境参数	温度	Temperature range for rated operation: +10℃ to +35℃ (+50℉ to 95℉) Max, ambient operation temperature: 0℃ to +40℃(+32℉ to 104℉) Max, storage temperature : -20℃ to +70℃ (-4℉ to +158℉)
	湿度	Range for rated operation: 45% to 85% RH/MAX, Ambient operating humidity: 35% to 85% RH
其他	附件	operator's manual 1	spare fuse 2
	电源	power cord 1	test probe (option) 2