913开关测试系统

The Model 913H LED and Keyboard Test System is a low-cost, NIST traceable, highly responsive, generic switch test platform. The 913 is used to perform 100% acceptance testing, quality assurance certification, incoming inspection, and engineering development of keyboards, keypads, membranes, snap-action switches, micro switches, general-purpose switches, cables, LEDs, and seven-segment displays. The system can be use to perform a complete keyboard test, keypad test or individual switch test.

The 913H consists of a circuit card assembly (CCA) and software installed by the user in a standard personal computer. It does not require a RS-232 channel which may be needed for a barcode scanner or production line device. It features 30 channels (expandable to 90), which can be configured as an x-y matrix. Resistance ranges of both 0-5,000 and 0-50,000 ohms are featured with other ranges available upon request.

A user-friendly Windows™ software environment allows the user to create a computer screen graphic representation of the unit under test (UUT), i.e., keyboard, LED, seven-segment display, etc. The software easily "learns" the relationship of the screen graphic to the UUT. The configurations created and test data obtained can be saved for future use and SPC action.

During keyboard testing, for example, the computer graphic displays key resistance and indicates tested and active keys by changing color. An audio tone is sounded if a key's resistance is equal to or below the user-programmed specified resistance. LED voltage levels are measured and illuminated in sequential order on the UUT and display for immediate visual inspection.

The 913H switch tester is a cost-effective, password protected fast-acting tool which is accurate, operator-friendly, and extremely easy to learn and use. Production Serial Numbers can be input manually or automatically via a barcode reader.

TRICOR offers a complete line of switch tester. The Model 911A Automated Keyboard Switch Test System, consists of the 913H CCA(s), additional software, and an x-y positioning platform. This system provides automatic, accurate positioning and testing of a UUT without requiring operator intervention.

Specifications

Feature Summary List

LED Visual Test

NIST Traceable with Certificate

Bold Colored Pass/Fail Indication

NIST Certification Tools Available

Clean Protected Internal PC Design

Drag and Drop

Serial Numbers via Keyboard or Scanner

12 meg ohm Shorts Test Range

More Production Space Due to Internal Design

Scalable LED and Switch Screen Sizes

Complete Turnkey Windows® Based System

Maximum Number of Test Keys: 225

Lot Numbers and Comment Field

17 Screen Key and LED Colors

Automatic Test Result Storage

LED and 7 Segment Electrical Voltage Drop Test

Frees up RS232 Assets for Production Scanners, Label Printers etc.,

Seven Segment Visual Test

Hot Keys for Editing

Preference Setting Capability

Multiple Password Protection

Allows Setting Minimum Resistance tolerance for keys

Preference Setting Automatically Loaded on Program Start

Automatic Key/LED Matrix Creation

Hundreds of Units in USE TODAY

High Energy Discrete Diode ESD Protection for Long Life

Simplified Windows® Interface for Non-technical Personnel

Split Interface Cable for Direct Split Keyboard Pigtail Connection

Upgrade Option to Automatic Production X-Y Tester

System Components

Circuit Card Assembly & Mating Connector

PCI CCA

37-pin subminiature D connector

Model 913H Windows® 98-Me, NT, 2000 Software. Supports up to 90 channels

Operating Instructions

Customer Requirements

Personal Computer 80486 or higher PC running Windows® 98-Me, NT, 2000 at 133 MHz or faster with PCI bus slot available per CCA

UUT Interconnect Cable

Options

Contact Resistance Ranges

Certificate of Calibration

LED/Seven-Segment Display Voltage Ranges

Test Interface Assemblies

Standard & Custom

Conversion Utility Program

Permits transfer of test data to standard database, spreadsheet and SPC programs

Calibration/Verification Fixture