Z9500高精密LCR测试仪

添加时间：2011-4-12 编辑：603 阅读：次

加入购物车

加入对比

产品名称：Z9500高精密LCR测试仪
产品定货号：ME-07673-00

产地：美国
推荐：

Z9500 - High Precision LCR meter ， Z9500高精密LCR测试仪

• Test Frequencies from 50Hz to 100KHz

• 0.05% Basic Accuracy

• 3.5" color TFT LCD display with soft keys for selecting all features and functions

• C + R, C + D, L + R, L+ Q, R + Q, R + X, OR Z + Θ(degrees or radiads). G, B, Y, Iac or Vac are viewed on the LCD in the monitor feature

• Built in comparator for Hi/Lo limit testing and Bin sorting

• 30, 10, 5 0r 1.5 measurenents second testing rates

• USB,RS232 and Handler Interfaces

• 1 to 256 Measurement Averaging

• Optional front Panel USB Host port for storing measurement data to a Flash ram

• Short and Open circui lead calibration

Measurements

Measured Parameters

L (Inductance), C (Capacitance), R ( Resistance), Z (Impedance), X (Reactance), Q (Quality factor), D (Dissipation factor), Θ (Phase angle in degrees or Radians);
The following Parameters are monitored only, no values for the parameters may be entered: G (Conductance) B (Susceptance), Y (Admittance), Vac ( Test signal voltage) and Iac (test signal current))

Resistance/Reactance

Measured Parameter	R + Q, R + X
Measurement	RX: 0.0001Ω to 9999.9MΩ Q: 0.0001 to 9999.9

Impedance

Measured Parameter	Z+Θ ( Phase angle in Degrees or radians)
Measurement range	Z: 0.0001Ω to 9999.9MΩ Θ? : -179.99? to 179.99? Θr: -3.1416 to 3.1416

Inductance

Measured parameter	L + Q, L + R
Measurement range	L: 0.0001nH to 9999.9H Q: 0.0001 to 9999.9 R: 0.0001Ω to 9999.9MΩ

Capacitance

Measured parmeter	C+R, C+D
Measurement range	C: 0.0001pF to 9999.9mF D: 0.0001 to 9999.9 R: 0.0001Ω to 9999.9MΩ

G,B and Y ( Displayed only)

Measurement range

G, B, Y: 0.00001nS to 999.999S

Test Environment

Test Voltages	0.1V, 0.3V, 1.0V
Test Voltage Accuracy	±(10% + 10mV)
Test Frequencies	50Hz, 60Hz, 100Hz, 120Hz, 1KHz, 10KHz, 20KHz, 50KHz, 100KHz
Test Frequency Accuracy	± 0.02%
Measurement Rates	Slow: 1.5 Measurements/Sec Medium1: 5 Measments/Sec Medium2: 10 Measurements/Sec Fast: 30 Measurements/Sec

Ranging

Types	Auto, Hold and Nominal Nominal ranging the Z9500 selects the best range according to the nominal value being measured
Measurement Circuit configurations	Series and Parallel
Output Impedances	30Ω, 50Ω, 100Ω

Trigger

Modes

Internal, External, Manual, Bus

Display

Display Type	3.5" TFT Multi line Color LCD with Back light
Displayed Values:	5 Digit multi line display of L,C,R or Z measurements and Q,D or Θ Mon1 and Mon2: Displays Y, B, G, Iac, Vac, L, R. Z,D, Θ or Q (Mon1 and Mon2 are displayed simultaneously on the LCD as separate lines)
Parameters Displayed	Measrements are displayed as: Absolute value, ? absolute , ? %

Meaurement Accuracy

Basic Accuracy	± 0.05% (see manual for accuracy conditions)
Input Compensation	Short and open circuit cand Load ompensation

Component sorting (comparator function)

Sorting types

Binning: Components are sorted in to 5 Bins , Bins 1-3, Aux and out of tolerance according to preset tolerances and Hi/Lo limit testing

Remote Operation

Interfaces	RS232, Handler and USB (RS232 to USB convertor) RS232 commands are SCPI compliant Optional front panel USB host port.
Storage	10 component setups may be stored and recalled from internal memory. Additiional setups and data may be stored in a flash RAM connected to the optional Front panel USB host port

General Specifications

Power requirements	120V AC 50/60Hz.. 220V AC operation upon request at time of purchase
Power consumption	Approximately 25 watts
Operating temperature	32°F to 155°F (0°C to 55°C)
Calibration temperature	73°F ± 9°F (23°C ± 5°)
Operating Humidity	15% to 85% at a wet bulb temperature of =104°F (40°C)
Dimensions	10.4" (W) x 4.21" (H) x 13.8" (D) 264mm x 107mm x 350mm
Weight	5.84lbs (2.64 Kg)
Accessories	Operator's manual, Test leads with Kelvin clips, Radial lead test adapter, Shorting bar AC line cord, RS232 cable, USB cable, USB to RS232 adapter and USB driver software.