Z8900-LCR测试仪

添加时间：2011-4-12 编辑：603 阅读：次

加入购物车

加入对比

Z8900 - LCR Meter， Z8900- LCR测试仪

• 100Hz, 120Hz, 1KHz and 10KHz test frequencies

• 0.1% basic accuracy

• 5 digit Back Lit LCD display

• C+R, C+D, L+R, L+Q, R+Q or Z+Θ measurements

• Built in comparator for sorting components

• Up to 12 measurements per second

• RS232 and Handler interfaces

• Easy to use front panel

• Short and Open circuit input calibration

Measurements

Resistance

Measured Parameter:	R+Q
Measurement Range	R: 0.0001Ω to 99.99MΩ Q: 0.0001 to 9999

Impedance

Measured Parameter	Z+ Θ
Measurement range	Z: 0.0001Ω to 99.99MΩ Θ: -179.99º to 179.99º

Inductance

Measured Parameter	L+Q and L+R
Measurement Range	L: 1μH to 9999H (100Hz and 120Hz) 0.1μH to 999.9H (1KHz) 0.01μH to 99.99H (10KHz) Q: 0.0001 to 9999 R: 0.0001Ω to 99.99MΩ

Capacitance

Measured Parameter	C+D and C+R
Measurement Range	C: 1pF to 19,999μ (100Hz and 120Hz); 0.1pF to 199.9 μF (1KHz) 0.01pF to 19.99 μF (10KHz) D: 0.0001 to 9.999 R: 0.0001Ω to 99.99MΩ

Test Enviroment

Test Voltages	0.1V, 0.3V and 1V
Test Voltage Accuracy	±10%
Test Frequencies	100Hz, 120Hz, 1KHz and 10KHz
Test Frequency Accuracy	±0.02%
Measurement Rates	Fast: 12 Measurement/Sec Medium: 5Measurements/Sec Slow: 2.5Measurements/Sec
Output Impedance	30Ω and 100Ω
Trigger	Auto and Manual

Display

Display type	320 x 240 pixel with backlight
Displayed Value	5 digit, dual display of L, C, R or Z and Q, D or Θ
Parameters Displayed	Measured value, ∆ absolute, and ∆%

Measurement Accuracy

Basic Accuracy	±0.1% (See manual for accuracy conditions)
Calibration	Zero input correction: Open and Short Circuit
Remote operation	RS232 and Handler interfaces

General Specifications

AC Power Requirements	220V or 110V 50/60Hz switch selected
Power consumption	≤20watts
Operating Temperture	10ºC to 30ºC (50ºF to 86ºF) @ ≤70% R.H.
Dimensions	(W x H x D): 13" x 6" x 15.7"
Weight	7.7lbs
Accessories	Operator's manual, Test Leads with Kelvin clips, Radial lead test fixure with Axial lead adaptor, shorting bar, AC line cord