8110物位开关

The 8110 is a vibrating level switch for liquids,using a tuning fork for level detection.It is designed for industrial use in areas ofprocess technology and can be used in liquids.Typical applications are overfill or dry run protection.The small tuning fork (40 mm of length) allows theuse in vessels, tanks and pipes.Due to the simple and rugged measuringsystem, the 8110 is virtually unaffected by thechemical and physical features of the liquid.It works even under unfavourable conditionssuch as turbulences, air bubbles, foam generation,buildup or varying products.

Materials

Tuning fork and fitting

Process seal / Housing

Stainless steel 316L (1.4435)

Klingersil / Stainless steel 316L and plastic PEI

Weight Approx. 250 g

Electrical connections Cable plug acc. to EN 175301-803 or M12 x 1 male

fixed connector

Process fitting Thread G, NPT 3/4”, G, NPT 1” or Clamp 2”

Surface finishing quality Ra < 3.2 μm (thread) / Ra < 0.8 μm (Clamp)

Dynamic viscosity / Density 0.1 to 10000 mPa.s / 0.7 to 2.5 g/cm3

Fluid temperature -40 to 100°C (150°C for Clamp process connection)

Fluid pressure -1 to 64 bar