8226感应电导传感器

The conductivity transmitter Type 8226 combinesa conductivity sensor and an electronicmodule with a display in an IP65 enclosure.The sensor component consists of a pair ofmagnetic coils in a PP, PVDF or PEEK housing.The cell constant is an average value over thewhole measuring range. It can be re-adjusted depending on application. The integrated temperature sensor for automatic compensation is a standard feature in the conductivity sensor housing. The transducer component converts the measured signal and displays the actual value. The conductivity transmitter can be installed into pipe by using INSERTION fitting TypeS020 available in stainless steel, brass or plastics.

Compatibility with fittings S020 (see corresp. datasheet)

Materials

Housing, cover, lid, nut

Front panel foil

Cable plug / gland

Wetted parts materials

PC glass reinforced fibre (if PVDF sensor)

PPA glass reinforced fibre (if PP, PEEK sensor)

Polyester

Stainless steel

Display 15 x 60 mm, 8-digit LCD, alphanumeric, 15 segments, 9 mm high