产品目录

品牌简介

范恩

范恩仪器公司设计和制造用于测量液体，特别是流量和粘度的检测仪，总部设在得克萨斯州休斯敦。范恩仪器公司自1939年以来一直是油田分析的质量工具的领先供应商，许多仪器和检测试剂盒的设计，符合美国石油学会（API）的测试标准，是适合现场和实验室的使用的。

>>品牌详情

推荐产品

热销产品

Model 35粘度计

2009/10/30 10:37:04 阅读：429次

加入购物车

加入对比

产品系列名称：Model 35粘度计
产品定货号：ML-00978-00

产地：美国
品牌：范恩
推荐：

Widely known as the Standard of the Industry for drilling fluid viscosity measurements.

Fann produces a range of true Couette coaxial cylinder rotational viscometers. The test fluid is contained in the annular space or shear gap between the cylinders. Rotation of the outer cylinder at known velocities is accomplished through precision gearing. The viscous drag exerted by the fluid creates a torque on the inner cylinder or bob. This torque is transmitted to a precision spring where its deflection is measured and then related to the test conditions and instrument constants. This system permits the true simulation of most significant flow process conditions encountered in industrial processing.

Direct Indicating Viscometers combine accuracy with simplicity of design, and are recommended for evaluating materials that are Bingham plastics. These instruments are equipped with factory installed R1 Rotor Sleeve, B1 Bob, F1 Torsion Spring, and a stainless steel sample cup for testing according to American Petroleum Institute Specification RP 13B. Other rotor-bob combinations and/or torsion springs can be substituted to extend the torque measuring range or to increase the sensitivity of the torque measurement. Shear stress is read directly from a calibrated scale. Plastic viscosity and yield point of a fluid can be determined easily by making two simple subtractions from the observed data when the instrument is used with the R1-B1 combination and the standard F1 torsion spring.