2009/10/22 16:49:19 阅读:503次
Superior technology Wherever gas hazards are to be found, the EC28 provides the best solution for safe monitoring. ATEX-certified design, built-in EX-certified horn and bright LED lights allow safe operation. The gas alarm is transmitted to the central control panel, simultaneously warning the control room and the worker in the danger area. Smart sensor technology Installation and sensor exchange are quick and easy using pre-calibrated smart, plug-in sensors. One-man calibration/ adjustment is possible directly at the transmitter, without opening the housing. Versions for each application EC28 basic unit EC28 D with additional display of gas concentration EC28 DA with additional bright LED lights and loud horn. The extra costs for installing an EX-certified horn and audible alarm are omitted EC28 DAR with additional external alarm relay EC28 B with additional bus connection EC28 DB with additional display of gas concentration EC28 DAB with additional bright LED lights and loud horn. The extra costs for installing an EX-certified horn and audible alarm are omitted EC28 i intrinsically safe version EC28 Di instrinsically safe, with additional display of gas concentration The advantages at a glance Three choices – no display with display or with display and built-in audible and visual alarms
ATEX-Certification II 1G EEx ia IIC T4/ II 2G EEx em [ib] IIC T4
BVS 04 ATEX E 132 X / BVS 04 ATEX E 132 X 0158
Ex-certified visual and loud acoustic alarm
Less wiring required
Simple sensor exchange using smart, plug-in sensors
Long sensor lifetime
Low maintenance costs
Status and function display directly on the transmitter
One-man calibration/ adjustment without opening casing
Operation possible in inaccessible places via remote control (option)
Remote control (option)
Some flammable gases are lighter than air (e.g. methane). If a transmitter is installed close to the ceiling, it can be connected by a fixed installed cable with a plug connection to the remote control. Thus, all adjustments can be made comfortably from floor level. With one remote control device, an unlimited number of transmitters can be controlled in this way. Using transmitters without display, the remote control shows the current values on its’ own display. The display of the remote control mimics the transmitter display exactly. Inspection, maintenance and adjustment are therefore greatly simplified. Using the remote control inspection, service and calibration can be performed easily by one person. |
产品编号 | 产品名称 | 产品简介 | 产品价格 |
---|---|---|---|
MR-00486-00 | EC28DA氧气变送器 | 0¥ |