美国terra universal公司是世界领先的设计者和制造者,其产品包括洁净室和实验室设备、干燥机、手套箱、干箱、手推车、专用柜等等。terra universa已成为此行业的制造专家,其产品被应用在关键环境当中,已有30多年的设计和制造经验。
2009/10/21 17:19:31 阅读:527次
Minihelic II® Differential Pressure Gauges
Combining clean design, small size and low cost with enough accuracy for all but the most demanding applications our Minihelic®II gauge offers the latest in design features for a dial type differential pressure gauge. It is our most compact gauge but is easy to read and can safely operate at total pressures up to 30 psig. The Minihelic®II is designed for panel mounting in a single 25⁄8" diameter hole. Standard pressure connections are barbed fittings for .1875" I.D. tubing; optional .125" male NPT connections are also available. Over-pressure protection is built into the Minihelic II® gauge by means of a blow-out membrane molded in conjunction with the diaphragm. Accidental over-ranging up to the rated total pressure will not damage the gauge. With removable lens and rear housing, the gauge may be easily serviced at minimum cost. With the housing molded from mineral and glass-filled nylon and the lens molded from polycarbonate, the gauge will with stand rough use and exposure as well as high total pressure. The 5% accuracy and low cost of the Minihelic®II gauge make it well suited for a wide variety of OEM and user applications.
Minihelic II® Differential Pressure Gauges
Combining clean design, small size and low cost with enough accuracy for all but the most demanding applications our Minihelic®II gauge offers the latest in design features for a dial type differential pressure gauge. It is our most compact gauge but is easy to read and can safely operate at total pressures up to 30 psig. The Minihelic®II is designed for panel mounting in a single 25⁄8" diameter hole. Standard pressure connections are barbed fittings for .1875" I.D. tubing; optional .125" male NPT connections are also available. Over-pressure protection is built into the Minihelic II® gauge by means of a blow-out membrane molded in conjunction with the diaphragm. Accidental over-ranging up to the rated total pressure will not damage the gauge. With removable lens and rear housing, the gauge may be easily serviced at minimum cost. With the housing molded from mineral and glass-filled nylon and the lens molded from polycarbonate, the gauge will with stand rough use and exposure as well as high total pressure. The 5% accuracy and low cost of the Minihelic®II gauge make it well suited for a wide variety of OEM and user applications.
|
产品编号 | 产品名称 | 产品简介 | 产品价格 |
---|---|---|---|
MB-00084-00 | 微差压力计 | 0¥ |