Advanced® Model BR2Advanced® Model BR2胆红素分析仪

Advanced Instruments Bilirubin STAT-Analyzer™, Model BR2, for Total Bilirubin and Direct Bilirubin Measurement

 

The Advanced Instruments Model BR2 Bilirubin STAT-Analyzer™ employs the method of Evelyn-Malloy, after Henry, to measure total bilirubin and direct bilirubin in neonatal samples.

 

The BR2 determines bilirubin levels through spectrophotometric analysis.

Works with infant plasma or serum samples

Requires only 30 µL of sample

Total bilirubin measured immediately, direct bilirubin takes just two minutes.

Easy to use, simple setup, calibration and operation

Uses and Applications

Identify hyperbilirubinema

Chart the normal course of post-partum physiological jaundice

Monitor those at high risk of kernicterus

Determine the onset of normal hepatic bilirubin conjugating mechanism

Advanced® Bilirubin Stat-Analyzer™ Photometer Technical Specifications

Electrical

Power Requirement: 100 to 130 VAC (60 Hz) or 200 to 250 VAC (50 Hz)
Fuses (2): 250 VAC time delay (Type T): 1/4-Amp (100-130 VAC), 1/8-Amp (200-250 VAC)
Power Consumption: 15 Watts
STAT Mode: Power left on continuously
Test Capability: Total and Direct Bilirubin, both on the same serum or plasma sample

Sample Volume: 30 μL

Sample Capacity: Single sample, disposable cuvettes

Readout: Three-digit, seven-segment LED display

Units: mg/dL or μmol/L (S.I. units for export only; 1 mg/dL bilirubin = 17.1 μmol/L)

Range: 0 to 30 mg/dL

Linearity: Within ±0.2 mg/dL from zero to 30 mg/dL (straight-line method)

Resolution: ±0.1 mg/dL

Repeatability: Within ± 0.2 mg/dL over entire range

Hemolysis: No interference from HbO2 levels up to 600 mg/dL

Turbidity: Negligible interference from turbidity associated with triglyceride (TGL) levels up to 500 mg/dL

Storage Temperature: -40 to +70°C (-40 to +160°F)

Operating Temp. (ambient): 15 to 32°C (59 to 90°F)

Drift:
Zero: Less than 0.2 mg/dL/hr after 30-minute warm-up
Calibration: Less than 0.2 mg/dL/24 hr after 30-minute warm-up

Room Humidity: 5 to 80% R.H. (non-condensing)

Test Time: Instantaneous for TOTAL Bilirubin, 2 minutes for DIRECT Bilirubin

Dimensions 
18 cm x 28 cm x 33 cm
(7" H x 11" W x 13" D)

Weight
Net:  4 kg (9 lbs.)
Shipping:  5.5 kg (12.0 lbs.)

Warranty: One-year limited warranty on workmanship and all parts except glass, plastic, and parts warranted by their makers.