MP85A/MP85ADP FASTpress工业放大器

Maximize the quality of fitting processes such as riveting, punching or press-fitting –using the MP85A FASTpress industrial amplifier from HBM.

Safe production … without speed limits!

 

MP85A FASTpress monitors your production processes in real time, directly during ongoing operation. Your benefit: A consistently high quality of your products – because MP85A FASTpress identifies problems immediately as they occur.

MP85A FASTpress processes the data of up to 300 fitting cycles per minute – and ensures maximum reliability even in the fastest production lines. Use MP85A FASTpress, the amplifier for monitoring fitting processes for acquiring up to two measured quantities, e.g. force and displacement or time, consistently by means of a tolerance band or using up to nine tolerance windows that can be defined as required.

Industrial fieldbus technology and digital inputs and outputs enable you to easily and optimally integrate FASTpress process monitoring into your automation system.

You can choose whether to store the data on your PC or on the memory card in the device. Storage on a memory card can be set up as a circular buffer for the last 1,000 oder 10,000 curves. In both cases it is possible to store curves and/or results in ASCII or Qdas format.

NOK processes only or

OK processes only or

All processes

 

The data on the memory card can then be transcribed to the PC. A report with all process information can be printed for each process if necessary.

Furthermore, a free HBM software tool automatically converts process data and results after storage in the data format IPM.

 

Key Feature(s)

100 % quality control of the production process

Powerful algorithms for monitoring fitting, testing and press-fitting processes

Universal twin-channel amplifier for TEDS sensors

Memory function for results, curves and device settings

Convenient integration into the automation system by means of standardized fieldbus interfaces

 

Accuracy	0.1
Housing	housing for mounting rail
Max. number of channels	2 / module
Interfaces	Digital I/O, CANopen, Fast Ethernet, Profibus DP (MP85ADP), Qdas, I-P.M.
Signal conditioning	low pass filter, zeroing, 4 limit switches/channel, algorithms for monitoring of the fitting process
Digital sampling rate	2400 values/s
Measured quantities	strain gages and inductive half and full bridges, LVDTs, potentiometers, voltage, torque, speed and angle of rotation, SSI transducer