BK879BK879高级通用LCR测试器

添加时间：2010-5-22 11:38:06 担当：未知阅读：次

产品名称：BK879BK879高级通用LCR测试器
定货号：DI-00095-00

推荐：

The 879 measures capacitance, resistance (of non-inductive components) and inductance. Components can be measured with selectable test frequencies in series or parallel modes as desired. The 4 1/2 digit main LCD displays values to 19,999, and the secondary 3 digit 1,000 count display reads D or Q. Both models can be used in either auto ranging or manual ranging modes.

Features

Selectable test frequencies 100Hz, 120Hz, 1KHz, 10KHz

Simultaneously displays measured component value and Q or Dissipation Factor (D)

Display hold

Relative mode

Tolerance mode

Backlight

RS 232 Interface (cable and software required)

General Specification

Items:	Model 879	Model 878A
Parameters Measured	L/C/R/D/Q/Θ	L/C/R/D/Q
Measuring Circuit Mode	Inductance (L) –Defaults to series mode Capacitance/ Resistance (C/R) -Defaults to parallel mode
Displays	L/C/R: Maximum display 19999 D/Q: Maximum display 999 (Auto Range).
Ranging Mode	Auto & Manual
Measuring Terminals	3 terminals with sockets
Test Frequency Accuracy: ±0.1 %	100Hz=100 Hz 120Hz= 120 Hz 1KHz =1010 Hz 10KHz= 9.6 KHz	120Hz= 120 Hz 1KHz =1010 Hz
Backlit display	Included	Excluded
Tolerance mode	1%, 5%, 10%, 20%	1%, 5%, 10%
Test Signal Level	0.6Vrms approx.
Measuring Rate	1 time/second, nominal
Response time	Approx. 1 second/ DUT (device under test)(@ manual range)
Auto Power-Off	5 minutes approx. without operation
Temperature Coefficient	0.15 x (Specified Accuracy) / ℃(0-18℃ or 28-40℃)
Operation Temperature	0℃ to 40℃; 0-70% R.H.
Storage Temperature	-20℃ to +50℃; 0-80% R.H.
Low Battery Indication	Approx. 6.8V
Power Consumption	Approx. 40mA for operation/ 0.08mA after Auto Power-off.
Power Requirements	1) DC 9V Battery 2) Ext. DC Adaptor: DC 12Vmin –15Vmax. (Load 50mA Min.)
Protective Fuse	0.1A/250V Fuse (input protective)
Standard Accessories	Test alligator clips (pair) DC 9V Battery. User manual
Dimensions (L/W/H)	7.2/ 3.4/ 1.6" (184/ 87/ 41 mm)
Weight	11.6oz (330 grams)

Electrical Specification

Accuracy is expressed as: ± (% of reading + no. of least significant digits) at 23℃±5℃and <75% R.H.

Model 879:

o Resistance (Parallel mode)

Test Frequency: 100 / 120 Hz

Range	Maximum Display	Accuracy		Specified Note
Range	Maximum Display	@100 Hz	@120Hz	Specified Note
10MW	9.999MW	2.0%+8 *3	2.0%+8 *3	After open cal.
2000KW	1999.9KW	0.5%+5	0.5%+5	After open cal.
200KW	199.99KW	0.5%+3	0.5%+3	-
20KW	19.999KW	0.5%+3	0.5%+3	-
2000W	1999.9W	0.5%+3	0.5%+3	-
200W	199.99W	0.8%+5	0.8%+5	After short cal.
20W	19.999W	1.2%+40	1.2%+40	After short cal.

Test Frequency: 1K / 10K Hz

Range	Maximum Display	Accuracy		Specified Note
Range	Maximum Display	@1K Hz	@10KHz	Specified Note
10 MW	9.999MW	2.0%+8 * 3	3.5%+10 * 3	After open cal.
2000 KW	1999.9KW	0.5%+5	2.0%+10	After open cal.
200 KW	199.99KW	0.5%+3	1.5%+5	-
20 KW	19.999KW	0.5%+3	1.5%+5	-
2000 W	1999.9 W	0.5%+3	1.5%+5	-
200 W	199.99 W	0.8%+5	2.0%+10	After short cal.
20 W	19.999 W	1.2%+40	2.5%+200	After short cal.